ZD-STK Series

ZD-1000STK/1300STK

Automatic slag removal machine

Applicable material: Iron plate

Technical parameters

  • Working width1000mm/1300mm

  • Working thickness2-80mm

  • Conveyor speed0.8-4m/min

  • Slag cleaning speed5-9m/s

  • Belt speed8-20m/s

  • Sand block speed7.5m/s

  • Max powe25KW/26KW

  • Rated voltageAC 380V/50Hz

  • Pressure0.6-0.8Mpa

  • Weigh4000kg/4600kg

CharacteristicsControl systemOther
  • Efficient removal of cutting slag on the surface of parts
  • The surface of parts shall be polished after treatment
  • Blunt the inner and outer contour of the part
  • Automatic compensation for abrasive material (optional)
  • Process parameters memory
  • Servicing intelligence remind
  • Abrasive replacement remind (optional)
  • Intelligent startup and stop
  • Siemens programmable control system
  • Variable frequency drive system
  • Step positioning system
  • Fault alarm hint
  • Appearance effect

    Slag hammer+Narrow sand belt+brush sand blocks

  • Grinding process

    Magnetic adsorption, conveyor belt conveying

  • Conveying mode

    The surface of the parts shall be smooth without damaging the oxide layer, and the internal and external contour shall be round

  • Application

    Laser, plasma, flame and other cutting and blanking processes

Dimension
Products Cases News Supports About

Friendly link

Service network FAQ
Copyright © Jiangsu Shinetek Intelligent Equipment Co., Ltd. 苏ICP备2023020071号-4
E-mail: Zhou-wj@sz-shinetek.cn
National hotline:
0512-62838411
+86 18082098801