ZD-TK Series

ZD-800TK/1000TK/1300TK

Automatic abrasive belt deburring machine

Applicable material: Stainless steel, iron, copper, etc.

Technical parameters

  • Working width800mm/1000mm/1300mm

  • Working thickness0.5-100mm

  • Conveyor speed0.8-4m/min

  • Abrasive belt speed9~20m/s

  • Brush speed7.5m/s

  • Max power12.5KW/13.5KW/16.5KW

  • Rated voltageAC 380V/50Hz

  • Pressure0.6-0.8Mpa

  • Weigh2200kg/2450kg/3000kg

CharacteristicsControl systemApplicationVideoOther
  • Remove silhouette edge slag, soft burr, hard burr, oxide layer
  • Chamfer of outside and inside profile
  • Abrasive automatic compensation (optional)
  • Process parameters memory (Except 800TK)
  • Servicing intelligence remind (Except 800TK)
  • Abrasive replacement remind (Except 800TK)
  • Sand belt dynamic balance system (Except 800TK)
  • Intelligent awareness protection (Except 800TK)
  • Intelligent startup and stop (optional)
  • Siemens programmable control system
  • Variable frequency drive system
  • Step positioning system
  • Fault alarm hint
  • slag, hard burr produced by laser, flame, plasma and other hot-working processes
  • Burr, sharp edge of NCT, die stamping, cutting, etc.
  • Appearance effect

    Surface long straight hair lines, Round and smooth outline

  • Grinding process

    Combination of triangular sand belt and brush sand blocks

  • Conveying mode

    Press roller clamping, Belt conveying system

Dimension
Products Cases News Supports About

Friendly link

Service network FAQ
Copyright © Jiangsu Shinetek Intelligent Equipment Co., Ltd. 苏ICP备2023020071号-4
E-mail: Zhou-wj@sz-shinetek.cn
National hotline:
0512-62838411
+86 18082098801